Pre-marked Tapes

Bigfoot Layout Tool | Pre-marked Tapes | Radius Tool | Chalk Boxes

To save you countless hours of layout time, Big Foot Layout Tools offers a pre-marked Keson Extrude Fiberglass Surveyors Rope. The rope is one quarter of an inch wide and coated in clear vinyl for excellent durability. Stall markings are marked on both sides, so you don't have to fight the tape to get it right side up. The Keson tape comes in 3 measuring units, inches, tenths of a foot and meters and 3 lengths.

If you work with many strange dimensions in your layouts, consider purchasing the tenths of a Foot tape. It will allow you to make layout calculations using an inexpensive handheld calculator. Big Foot Layout Tools can put special measurements on the tape according to your specifications if desired. If ordering custom measurements, please allow extra time for delivery. These tapes are delivered ready to use with the Big Foot.

Available Measurement Units:  
Tenths of a Foot
Inches
Meters 
 

Available Lengths:  
300 feet
200 feet
 
Markings Key for Standard Tape:  
90 degrees
8.5 feet - black
9 feet - green
10 feet - blue
60 degrees for 9 ft. Stall
10' 5"  - Red 
 

Good News!

Now you can have the stall sizes you want on your tapes. 90, 60 or any degree; your choice of angle. On the 300' or 200' Surveyors Rope, Inches or Tenths.  You could have a selection of tapes with the same markings.  Or a tape with just 60 and a tape with just 90 degrees.  Keep it to 4 stalls and 4 colors - Red, Blue, Green and Black.  Less confusion later on! Let me custom mark your tapes... SAME PRICE!  Call with questions.

-top of page-